<strong id="wgckh"><blockquote id="wgckh"></blockquote></strong>
  • <dd id="wgckh"><output id="wgckh"><b id="wgckh"></b></output></dd>
  • <track id="wgckh"></track>

      <span id="wgckh"></span>
    1. <legend id="wgckh"></legend>
        熱線:15064011858
                13245313178
                0531-88275058
        當前位置:首頁-新聞中心>公司動態>禮品盒常見的瑕疵或質量控制點有哪些?

        禮品盒常見的瑕疵或質量控制點有哪些?

        來源:http://www.578114.com/ 時間:2021-09-14 發布人:admin

        松邊:紙張裱糊后在盒體的四個口邊,出現粘附不緊實、紙與灰板間有懸空現象。

        Loose edge: after the paper is pasted, there is loose adhesion and hanging between the paper and the gray board at the four edges of the box body.

        折皺:裱糊后紙張表面形成不規則,長短不一的死折。

        Crease: after pasting, the paper surface forms irregular dead folds of different lengths.

        破角:紙張裱糊后在盒體的四個角出現紙張破損、露白的現象。

        Broken corners: after the paper is pasted, the paper is damaged and exposed at the four corners of the box body.

        露灰(露底):由于刀版制作的準確性不夠精確,或裱糊操作時定位的偏移,造成裱糊紙張折起后疊壓處錯位,致使灰板露出。

        Exposed ash (exposed bottom): because the accuracy of knife plate making is not accurate enough, or the positioning offset during pasting operation, the stacking position of the paperboard is misplaced after folding, resulting in the exposure of the ash board.

        2-21091416415W62.png

        起泡:盒體表面局部隆起不規則、大小不一的泡狀體。

        Blistering: irregular blisters of different sizes on the surface of the box.

        膠漬:表面存留的膠水痕跡。

        Glue stains: traces of glue left on the surface.

        凸出物(暗瘡):有顆粒性物質殘留在包料的下層,將表面局部撐起,破壞了盒體表面的平整度。

        Protrusion (acne): there are granular substances left in the lower layer of the packing material, which locally prop up the surface and destroy the flatness of the box surface.

        高低角:灰板半穿模切或開槽后,四邊折起成型出現相鄰的兩個邊高低不一致。

        High and low angle: after the gray board is half through die cutting or slotting, the four sides are folded up to form, and the height of the two adjacent sides is inconsistent.

        水波紋:盒體裱糊完成后,為使其邊角黏附的更緊實,還需要用刮板對盒體的四個邊進行刮邊處理,由于用力不規范,整條邊就會出現長短、凹凸不一的條狀或小泡,似是水波紋。

        Water ripple: after the pasting of the box body is completed, in order to make its edges and corners adhere more tightly, it is also necessary to scrape the four edges of the box body with a scraper. Due to the non-standard force, strips or bubbles with different length and concave convex will appear on the whole edge, which seems to be water ripple.

        今天小編給大家呈現就是關于濟南禮品盒的相關知識,如果您對于本文有什么疑問及問題歡迎來電咨詢或者網站下邊留言:http://www.578114.com

        Today, Xiaobian presents you the relevant knowledge about Jinan gift box. If you have any questions and questions about this article, please call us or leave a message below the website: http://www.578114.com


        上一篇:濟南包裝箱廠:食物包裝箱有哪些分類?
        国产精品亚洲专区无码老司国,撕开奶罩揉吮奶头免费视频,久青青视频精品免费观看,国产精品无码视频一区二区三区